Sunday, November 9, 2008

The Sansui 1000 Receiver

The Sansui 1000 is very different from the Sansui 1000a. Via this site it seems the relatively common 1000a was manufactured from '64 through '72 (!) and uses the formerly rare 7591 output which is now being manufactured by several vendors. The very rare 1000 apparently was manufactured in '63 only and uses the oddball 25E5 (PL36/CV10341) output with the distinctive anode on top.

The Sansui 1000 is to my eye much nicer looking than the 1000a and the 25E5 has the advantage of actually being relatively cheap for an NOS pentode. Here are some photos of a customer unit take at Austin Stereo:



Note the connectors to the tops of the outputs at the top of the second picture. Make sure you label them when removing the tubes. They need to go back to the correct tube! The build quality is top notch, as one can always expect from Sansui. You gotta love those transformers. The 1000 is a very nice sounding receiver with a fine tuner and enough power to drive full sized speakers.

For those interested, here is a close up of the 25E5/PL36/CV10341 output tube.

Saturday, November 8, 2008

In Memoriam: the Automatic Radio OMX-9843 8-Track Receiver

To paraphrase an old joke about motorcyclists sans helmet: what do you call an 8-track receiver? The answer, of course, is: an organ donor.

I recently found a Technics SA 303 receiver in excellent shape except for a broken bass control pot. What to do? I did not have an appropriate vintage pot to repair the unit and I doubted that I could find a new one that would suffice. Luckily, I stumbled onto an early '70s vintage 8-track receiver from a brand I assume is long gone, Automatic Radio, from Melrose, Massachusetts. Today, there is pretty much no one who is interested in such a device. But, the moral of today's blog is: do not judge a receiver by its cover.

The OMX-9843 was an entry level combo receiver marketed by an American-based company, but made in Japan. The $159.95 price sticker was still on the bottom. From its appearance this was not a mainstream, hifi retailer unit. It was probably sold at a local furniture store or a regional chain like Gibson's here in Texas. The case was the typical vinyl over Philippine mahogany (why did they do that??), and inside was essentially two units: an 8 track player on the left and a very minimalist am/fm receiver on the right with lots of small bolts and nuts holding it all together. The 8-track player scavenged power from the receiver via an internal plug in a manner that suggests that something else might fit on the left. I wonder if someday I might stumble on a cassette version of this beastie? The Matsushita amplifier outputs produced a hefty 6 watts a side, low even by the standards of the early '70s.

The point of all this? Back when manufacturers cared even the most entry level of electronic products were well made. For example:


The pots in the photo above were made by Alps. The tiny driver card has 4 small can transistors by Matsushita, the same as the two on the tone control card. Sorry, the cute Matsushita outputs were donated to Austin stereo before this picture was taken. The switches are still crisp and the hardware is very high grade and about half is non-magnetic. This is all high quality stuff, and will see service in other gear from the era.

Who woulda thunk that parts from an Automatic Radio would extend the life span of a Sansui or Technics receiver?

Sunday, October 26, 2008

Orion, TeraPeak and the Audiogon Blue Book

I recently was overcome with a desire to actually do a bit of research on the vintage hifi market. Not that I was exactly obsessing, but I was really curious about a few items, curious enough to spring for a few bucks. What was available?

I own a very old ('93) copy of the Orion Blue Book for audio. How I managed to buy that is a story best saved for another day, but it has been moderately useful over the years so I don't regret the pain and anguish. Much. Orion is a staple in the pawn business and anyone who buys and sells audio gear (and musical instruments, etc.) is familiar with the product. While Orion is often completely clueless about an item, it is a good place to start a valuation hunt. Over the years Orion has culled its older entries so it's best to have multiple copies that span the years. Orion is often way off in valuations, always on the low side. I imagine Orion's information sources are limited on thinly traded, more esoteric items.

So, was there anything better than Orion? eBay and Audiogon are the primary sources for audio sales, so what did they have to offer?

Audiogon.com describes itself thusly: 'The Audiogon is a membership based community of high end audio enthusiasts.' It provides a very popular auction and classified system for audio sales. Membership is free. It also provides a Blue Book valuation service for a yearly fee of $50 that is easy to use and provides some nice touches, such as a graph and transaction counts. It is fairly comprehensive but is not without some holes. I own a Fisher SA 300 tube power amp and they indicate it is worth $190. I will take a dozen at that price, please.

eBay seems to be troubled entity these days. I am strictly a buyer, so it has not been bad from my perspective, but sellers are not happy. eBay has made policy changes that expose low volume sellers to abusive buyers. Again, this discussion is best left to another time. My biggest gripe with eBay has been the limitation of viewing completed auctions to 2 weeks. Viewing completed auctions is useful to me as a buyer, but I would think it would be crucial to a seller. While wandering my eBay home page I noticed the 'Marketing Tools' link and therein lies a tale.

Long ago eBay provided access to a longer history, but they obviously determined that access to historical information was a sellable product. In the marketing tools section of the site I found a link to Market Research, and a Fast Pass service for 2 days access to 90 days of completed auctions for $2.99. When I tried to purchase this service I was 1) routed to create a seller's account and 2) routed to Paypal and 3) routed to TeraPeak.com. And then it got interesting. It turned out that the Fast Pass service did not actually exist.

I can only conclude that eBay killed their Market Research offering and sold it to TeraPeak.com without doing proper job of connecting someone interested in the service to TeraPeak. First, let me make very clear that TeraPeak is not at fault here. My several frustrated emails to their customer service staff were very promptly and professionally handled. My emails to eBay went into the bit bucket, of course, but that was expected. It turned out that TeraPeak offers (essentially) a two tiered system to access 90 days of eBay history. You can buy 1 month at $24.95 or a year at $197.95. I tried it out for a month.

TeraPeak.com offers a search engine with access to 90 days of eBay auctions. You can pick your eBay source and tweak it with some Addons, but the gist of the service is a nice query generator and aggregator for eBay's recent history.

The TeraPeak.com/eBay combo is a not exactly a Blue Book but it could ultimately be the ideal solution to the valuation issue. Nothing beats actually looking at a transaction since condition, the quality of the presentation, and the transaction form mean so much. TeraPeak does a good job of presenting the information and its searches (which I presume are actually run on eBay's servers) are quick. It's layout takes a bit of getting used to but it is reasonable.

I used the service for a month and was relatively happy with the results. However, I did not renew my subscription. TeraPeak.com is a competently run site whose primary limitation is eBay imposed: they only have a rolling 90 days of history. Much of what I look for are very thinly traded items, so it is sometimes tough to find what I am looking for in that 90 days. I also determined that the all-or-nothing approach to eBay data was not cost effective for me. I would be happiest to pay for my interest and that alone. I do not need access to 90 days of dinnerware or costume jewelry. I passed this request on the the TeraPeak staff, so maybe someday...

One last issue: TeraPeak is a subscription service and will bill your credit card on a recurring basis. I had assumed that I purchased a single month and was surprised when I was billed for a second month. I was not paying attention, I guess. If you do not want to continue the service it appears the default when you cancel is for next month, not immediately. Hence my cancellation did not exactly work as I had hoped. However, an email to customer service appears to have corrected the situation.

Oh, and while researching this write up I discovered that eBay had scrubbed the links to the Market Research service, so maybe my emails actually reached someone.

Monday, October 6, 2008

The Hurrier I go the Behinder I Get

I am hopelessly behind in posting my restoration efforts. I was missing a camera for a few weeks... Waiting in the wings are write ups for the Marantz 2230, the Nikko 815, the Toshiba 330 pre/power pair, and the JVC JR-S200 receiver. Oh, and I forgot: the Marantz 115B tuner, part of a set with the 3600 preamp and the 250 power amp, both awaiting the soldering iron. Oh, and the Advent 300 restoration shoot out awaits. So, consider this next item an apertif: the Realistic Minimus 1 speaker.

Orion says the Minimus 1 was produced from '69 to '73, my college years! While the Minimus 7 is a common item, this pair of Minimus 1's is the only pair I have ever seen. Maybe I don't get out enough. But doing a bit of research on ebay shows that in the last 90 days 270 7's have been auctioned, compared to only a single pair of 1's with blown woofers. That's rare.


Yes, that is real walnut veneer. They are slightly larger than the Minimus 7, well built but with something funky going on in the back:


Note the 3 posts: you can augment the high frequency balance via strapping the middle post. Here is what is going on inside.


This is looking through the woofer hole at the crossover. The 3 posts are visible, although a bit obscured with polyester fuzz. The post at the right, missing the screw, hence the dark center, is actually the leftmost, positive terminal. (Remember, we are flipped!)

There is a 6.8mfd cap on the tweeter. This was my reason for being here, one of the pair was a bit dull sounding, so presumably one (or both) of the caps was aging. Both were replaced with film. And I managed to keep the burns to a minimum in the tight space, thanks for asking.

The crossover is a second order on the tweeter with a wire round resistor taming it a bit. The tweeter coil is actually at the far left in the picture. The woofer filter is a first order (ie. just the coil at the right) but strapping the middle post adds the wire wound resistor at the bottom to dial the woofer back a bit. 'Increased' high frequency is really diminished low frequency. So, back in the day your $60 bought you a nicely finished two way with 5 components in the crossover. In just a few years the trend would be a single cap on the tweeter and zip on the woofer (eg. the EPI 100.)

The Minimus 1's have a solid following on ebay with good reason. Working pairs seem to go for about $75, a bit more than their original cost in the early '70s. They look great, very '60s-ish with the sparkle cloth grill and very well done veneer. They are very musical performers despite limitations at either end of the spectrum. The woofer quality is such that I have wondered if it is scavenged for other projects. Buy 'em if you find them at your local thrift!

Monday, September 15, 2008

John Iverson in the House!


Finally my John Iverson Electron Kinetics Eagle 2C amp is here!

Ever since reading about this amazing maverick genius American and his foray into audio design, I have wanted one of his amps. They are getting hard to find.

There is still good info about this great man and his unexplained disappearance. I will post what I know next time.

Here it is! All the way from Canada, and this man has to win the Right Proper Packing Award!

I have received a lot of gear through UPS and the Mail and it can be heartbreaking to receive a treasured item nonpacked by unconscious idiots.

Sorry, I digress.

This was not the case here. Completely bullet proof, it could have gone round the world a few times and dropped off several conveyor belts and still arrived in pristine shape. Took me 10 minutes to unpack it!

This little 30 pounder puts out 120 wpc @ 8 ohms and 320 wpc @ 2 ohms all day! 160,000 uf capacitance and a hand wound transformer.

As demo, John would cross the speaker leads till sparks and melting wire were everywhere, then hook up to the speakers and voila.... They have a reputation for fantastic bass control and often used in bottom end of bi-amping set ups. The later models were smooth and balanced throughout the frequency range. This is a later model ;-)

After a check out by our resident master at Austin Stereo Repair we'll be trying it out with those bass hungry Infinity Quantums.

Long live John Iverson, may he rest in peace.....

KEFs up and running!

Finally the Kef 104.2's are done!

After getting the beautifully redone woofers back from Wes at Austin Speaker Repair I spent a couple of hours installing everything, hooking up and soldering. The original butyl rubber surrounds were too far gone for refitting/gluing so they were cut back to the cone and new foam surrounds were fitted.

I checked my work as I went but it wasn't till I was all done with the 30 something wires and 50 something bolt/screws that it occurred to me that maybe I should have fired em up before that.....oops...

As luck would have it there was sound when I gingerly turned up the volume! Not a lot of bass to speak of but full spectrum sound.

Long story short, they have been running for 3 days and the sound is still improving. They sound magnificent! The caps and the new tweeters seem to be working out really nice. Even when powered by my Sansui G-8000 I am hearing dynamics and detail on some recordings that are pretty much.. damn... ;-)


I'm a happy camper, cant wait to hear what they will sound like fully broken in with a CJ premier 10 up front. Long live Sir Raymond Cooke! May he rest in peace.

Friday, September 5, 2008

Road Trip to Florida!

Had a chance for a nice road trip last month. Drove my old Subaru out to see my good friend Wes Swenson who lives right outside of Panama City FL.


Wes and I flew Chinooks together in Vietnam in 1969 so we go back a bit. It was great to see him again and hang out for about three days.

He has retired from flying but keeps busy working in his large beautiful studio as a master potter and clay worker.

I drink my morning tea out of his mugs which are as fine as anybody's anywhere. He has his own kiln and is busy working on an awesome chess set, among other things.

Beside general reminiscing and catching up on life we listened to Wes's considerable stereo rig consisting of a modified Philips CD player, a Audio Research SP-9 Mk II tube preamp, an Audio Research D-125 behemoth tube amp sporting 4 6550's per side and a tall set of Vandersteens, 3's I believe. It was great sounds.

While I was out there I picked up a set of KEF 104.2's that were delivered to Wes's house from a nearby eBay gentleman who was selling them for parts. Nice rosewood cabinets. When it was time to go, we loaded up the Kefs, filled the spare tire, said our so longs and I headed the old Subaru home.

The trip went smoothly, about 13 1/2 hours straight through. That 240K mile Sube ran like a Swiss watch. Averaged 31 mpg going about 70mph with the A/C on the whole way, without burning a drop of oil.

Those flat opposed 4 bangers are tough as nails. Made in America too!

I figured I could do the Kef rebuild myself so I took the units apart, removed the X-Overs and replaced the tweeters with some new Peerless DX-25's.

The old Kef tweeters start losing their ferro fluid after 20 years and it hardens. They were both bad.

The crossovers were in pretty good shape so I only replaced about 7 capacitors on each board. Those x-over assemblies weigh about 5 lbs each and are a little tricky to get in and out.

I quickly realized that redoing the woofers properly was past my pay grade, so, off they went to Austin Speaker Repair.

The 104.2's are considered a genuine classic from the late '80's. Highly regarded in many circles as one of the great designs, they were and still are awesome performing speakers for their size. 36"x11"x13" and about 72 lbs each, they reek of quality. Beautiful veneers, solid bracing and those great Kef components. Thank you Sir Raymond!

Some consider them pretty gawky looking as they have a externally mounted metal case holding a D’appolito MHM arrangement that is completely outside the cabinet.


Inside the cabinet are 2 - 8" woofers firing straight up and connected with a stabilizing aluminum rod. They fire through a 4" opening in the front of the cabinet and manage to put out considerable bass. We''ll see.

When it's all done I'll let you know how they sound!

Road Trip Lexington: Pops Resale and Consignment


For the last 14 years my sole trips for pleasure have been to Lexington, KY, to visit my family. For many years I frequented the flea markets around town, as well as those in Georgetown, Cincinnati, and southern Indiana, but these flea markets ebbed as ebay flowed. The Gibson guitar amps, the McCoy pottery and the Griswold fry pans were being peddled to the world along with those Heathkit tube amps I lusted after, and my Sunday afternoons were not the same. The hifi gear that was so plentiful in the early '90s was gone. How was I ever going to maintain my habit!??

About 10 years ago I visited a Goodwill in the Meadowthorpe Plaza on Leestown Rd. and stumbled into a long and narrow space nearby: Pops Resale and Consignment. At the time it was just two years old and the space was not yet full. But it had a healthy stock of vinyl and gear at very reasonable prices. The lanky proprietor, presumed to be Pops, was friendly and knowledgeable, and willing to accommodate the stray visitor from Austin. I was hooked. Over the years I have always made time for a visit or two, and I usually manage to bring my 90 year old Dad to make sure he gets a bit of exercise.

Pops Resale is truly a mom and pop operation. Pops is owned by Dan Shorr and his wife Sharon, and they are in their 12th year of business. From their web site it seems that Pops was not really Dan's nickname, but it was an inevitable outcome of the business. The origin of Pops is the 'Previously Owned Products' they intended to sell instead of mass market, landfill-destined, contemporary dreck. Vinyl is still the bread and butter of the business, and vintage hifi gear is prominently featured, but the back has been opened up and now contains an extensive collection of vintage clothing and furniture.


In the early days Dan tried to host live music with limited success, but now he books Saturday afternoon shows over two months into the future. Here is the band setting up:

I am a big fan of '70s silver faced receivers. Many years ago I purchased a non functional Pioneer SX 1250 and had Pops ship it to Austin. No problem, Pops can accomodate. Some of Pops' gear is sold on consignment, most is his. Sometimes items are sold as-is in non-working (or semi-working!) condition for those of us who are game for some sweat equity. Items are always clearly described and prices are very reasonable. He has a steady supply of turntables for those who are vinyl impaired. Turntables are hard for me to get back to Austin, and I have thought about it on occasion... but I have been strong. Over the years my purchases have included an Akai M-8 tube type tape deck and a very lovely Technics SA 8100X quad receiver, both of which are in the queue to get restored and written up on this site. Here two customers are assisted by the 3 resident Drs. of Gearology:


To very briefly hop on the soap box: the quality of vintage gear is very hard to match in modern components at a corresponding price point. The build quality is just superb in '70s Sansui, Yamaha, Marantz, Pioneer and a host of other manufacturers. However, capacitors age and pots and switches get dirty. Do your ears a favor. Buy vintage gear from Pops and the other merchants around the country who protect these marvels of industrial art from the landfill. And if your vintage gear sounds a bit muzzy, support your local tech and get it restored. Your grandkids will thank you!

This year Dad told Caitlin behind the counter: 'You have everything I don't need.' That is correct, Dad, Pops Resale specializes in items that I want. Here's Caitlin at the check out:


Pops Resale and Consignment is located on 1423-B Leestown Rd. about 1/2 mile east (towards the center of town) from New Circle Rd. Give Pops a call at 859-254-7677. If you make it to Lexington and you are a fan of vintage records, gear, clothing or collectibles you just can't afford to miss it. It's a treat.

Tuesday, August 19, 2008

The Sherwood 7310 Receiver

I have long regarded Sherwood gear as sleepers. In my young adulthood it was a brand that I could afford (via Illinois Audio: ahh, the days of discount mail order) and their receivers sounded good to my young ears. The 7310 is the middle of the line from about 1975 and boasts 38 real world, rms watts. Original list price was $380. I purchased a new 7210 in 1975, and remember it fondly.

Sherwood build quality is not as impressive as Marantz, but manages a significant sonic mojo. The receivers sound bigger than their advertised wattage and the tuners are solid all 'round performers. Cosmetically, Sherwood lags a bit behind Marantz, but a clean example represents '70s hifi style very well.
The 7310 offers the David Hafler's Dynaquad circuitry, an island of sanity in this era of quad madness:This 7310 worked well on arrival. Even the lamps worked. So, on with the restoration! The board layout is straight forward with only the treble/bass board presenting a significant challenge. Here is the bird's eye view from the top:
The power supply board is at the lower right, below the transformer. The output boards are in the upper middle and are accessible from below. The tuning capacitor is at the upper left, shielded. Immediately below it are the AM and FM boards that required removal of 4 screws and some tugging to restore. But whither phono?The phono board is located underneath the unit, at the upper left in this photo. Note the two power supply filter caps in the upper right corner. These slightly obscure the treble/bass board that hides just behind the face of the unit. Changing the caps on this board requires peeling the face and unclamping the filter caps. As luck would have it, my back order of Elna Silmic II caps had just arrived so the 8 4.7 mfd caps on this small board were replaced with silk. The tone control circuit is not defeatable, so it better sound sweet when driven by the cd player not yet imagined in 1975.

All other caps were replaced with Panasonic FCs with extra margin on the voltages. A total of 50 caps were replaced, the 6.8k main filters were left as is. Pots and switches were cleaned with Blue Foam and Deoxit Gold. The tuning capacitor was spritzed with Deoxit Gold.

The end result of my labors was a very sweet sounding unit that should last for another 20-30 years. The overall sound is lush for a string quartet with enough punch to do justice to Metallica. And it looks good. One more look with a bit of drama:

Saturday, August 2, 2008

Last of the Family: the NAD 1020 Preamp

The 1020 preamplifier is the last of the NAD family fest I celebrated last month. The exterior is very similar to the 3020a that I restored with the distinctive horizontal rear deck for connections. Acres of space are available under the hood and cap replacement is a breeze. It is much easier to work on than the Kenwood C2, no origami skills needed. Here it is with top popped:

Hmm. Looking at that board, you would think they took the 3020 and threw out the amplifer and called it a preamp. Hmm. And you would be correct, sir. The transformer is much smaller and two fuses at the left are skipped, but that is the very same board. The same tone control circuitry with the hard to find .68 mfd bass control caps is strung out along the front. The unshielded phono section is in the back right for the typically short signal path.

Restoration required 32 new Panasonic FC caps and the usual cleaning of controls. Not surprisingly this is a very nice sounding preamp, very neutral in presentation with a nice phono section. I think it would mate nicely with an amplifier with a bit of zip to it.

I love the rear deck feature which I first encountered in the Amber Model 17 preamp long ago. (Hmm again, the Amber family could use a write up.) And I love how pleasant it is to work on. Here it is in my feeble attempt at an artsy photo: